Buy Low Price From Here Now
50 Watt Power Amplifier for multiple Custom Home Audio Distribution and Home Theater Applications. Ideal for use as a remote amplifer, A single zone amplifier, or rear channel amplifier for Dolby 6.1 / 7.1 systems.
Readmore
Technical Details
- 2-channel 100-watt (50 watts x 2) power amplifier (provides 150 watts RMS bridged mono power)- Ideal for use as a second-zone amplifier or as a rear-channel amplifier in a 6.1- and 7.1-channel system
- Pair of stereo inputs with priority override; A/B speaker selector allows multi-room amplification
- Signal-sensing auto-on/off switching conserves power while simplifying setup
- Measures 16.5 by 2.9 by 9.25 inches (W x H x D); 2-year warranty
See more technical details
By D. Jackson (Pittsburgh, PA USA)
So, if you get a lemon, it looks like you're out another $85 to replace it. I certainly didn't get a lemon; I've considered calling the customer support line to just say thank you! Expecting the customer support is nonexistant, but for $85 for a working amp, I've gotten more than I paid for.
It sounds good, even with the volume turned up. Clear, no noticeable noise.
It was dirt cheap, even compared to the rest of the Chinese imports.
It shuts itself off when no signal is coming in, so it doesn't suck down electricity or overheat.
It has two inputs, that auto-switch; television is hooked to one, and Airport Express + turntable to the other, with a Y-cable.
There's not a million confusing buttons, confusing displays, or anything else. There's a volume knob, and I leave the rest alone.
If it matters, it's plugged into Polk TSI100's. They're supposed to be rear channel speakers, but they're more than sufficient for home audio for me. Decent bass, even. I've had the amp plugged into Sony B3000's; slightly better base, but much bigger next to a teevee.
Thinking of buying another one to replace an older, dying Onkyo receiver unit in the finished basement. Hrrm.
By Lazarus Dark (Memphis, TN USA)
Actually, my expectations were a little low, this performed better than I thought it would. I upgraded my whole theater with new speakers and amps, but I haven't gotten a reciever yet. Currently I am using the analog outs on my HTPC straight to the amps. I got some really good amps for my Center and L/R speakers, but I didn't want to spend much on the amp for the rears because I do plan to get a new receiver soon that will run the rears. So I just needed a cheap temporary amp for the rears. My rear speakers can handle up to 100 watts so they are a little underpowered with this amp, I actually have the amp volume set to 95% all the time and it still doesn't sound loud enough all the time. Still, the audio is clear and I haven't noticed any clipping from the amp. It actually sounds better than I expected. When I get a new reciever, I plan to use this little amp to power some outdoor patio speakers.
By Marc A. Garza (Saint Amant)
I just got this in today.Got it hooked up.So far so good.I have it powering four Sony SS-B1000 5 1/8-Inch Bookshelf Speakers.Signal to input 2 is from my computer.Input 1 gets it's signal from my iPod.The signal switching works as advertised.As soon as i press play on my iPod it switches over instantly to input 1.Nice.
The A B speaker selector works as it should.Choose either set A or B. Or press both buttons at the same time to power all four speakers.In this configuration each one receives about 30watts rms.Plenty for my set up.Pretty loud and clear sitting in front the computer.lol.Sound is great also.
No comments on the auto shut off.I have it switched off and I just manually turn it off since its within arms reach.All in all im very happy with it so far.Good price.Good sound.Works like it should.
By Stephan Nishimuta
The AMP-100 is what it is and it serves it's purpose well. I installed it in an office wired to speakers in five separate rooms. It was a perfect solution for this application and at a great price.
I needed mono output and the technical support was easy to reach on the phone and very helpful at ensuring I set up the system correctly to get identical sound from each speaker.
The instruction manual could be better written, but if you don't mind making a phone call to the company they will walk you through any questions or issues. They had technical information on all of the other stereo system components I was installing to ensure everything was compatible.
By J. Willis
Excellent value for the cost: I use this Amp-100- 2 channel Bridgeable stereo power amp, with a pre amp. Speakers where easy to attach, and the sound quality was good. I also utilized the amp-100 to pike music from my computer, again with great sound quality.
Images Product
Buy AudioSource AMP-100 2-Channel Bridgeable Stereo Power Amplifier Now
0 comments:
Post a Comment